Indoors

Archived posts from this Category

Save Money On Carpeting By Using Carpet Tiles

Posted by on 06 Aug 2012 | Tagged as: Indoors

The home is more than likely your most expensive asset, as with most consumers. Keeping your home looking good is a forever ending task. Not just from the cleaning aspect but also with updating old furniture, and fittings that are just worn and tired. One of the fittings in the home that gets constant wear is the flooring, and that goes for every room. Infact not only at home but also in the work office. As with any home improvements made they can cost a fair amount of money. Prices vary depending on what you use. Whether it be an expensive wood flooring, or a cheaper fitted carpet. The most popular flooring type is still a fitted carpet, however a great alternative often overlooked that can save you a great deal of money is a modular flooring in the form of carpet squares.

Also known as carpet tiles this flooring solution has many benefits to save you money which include:

  • No underlay required, so a complete purchase saved there. With bitumen backing these tiles already come ready equipped to deal with the wear against the sub floor underneath.
  • Just buy the amount of carpet tiles you need, instead of buying a full roll of carpet with a large amount of offcuts. Meaning less waste and less cost for yourself.
  • Carpet tiles coming in smaller easy to handle 50cm squares means they are much easier to fit. So much so that you shouldn’t need to fork out on an expensive fitter to lay them. Very little skills are required here, so even the most novice DIY enthusiast can easily fit them. Click here for an easy to use guide. Also getting around the furniture in the room can be much easier, by completing one area, putting the furniture on top of that area and carrying on.
  • Just imagine for a second you did go for the option of a fitted carpet, and over time say the area in the doorway looks very worn and the carpet needs replacing. In this situation you would replace the carpet in the whole room, and possibly the underlay too. However in the instance of using carpet tiles, you would only need to replace the few damaged tiles, thus saving you a great expense and of course hassle too. Just make sure when you do order your carpet tiles you also get some spares too for this very reason, as in the long run it will save you money.
  • Used carpet tiles are much more reusable than a fitted carpet. If the carpeted area is not so important for instance maybe in the loft you could always consider buying used or reclaimed tiles to save yourself even more expense. There are a few suppliers that specialise in this field, where they also buy back used tiles if they are still in reasonable condition. So if you do look after your flooring, and in years to come you want to change it you can possibly sell it to offset against the cost of your new flooring, and at the same time be environmentally friendly.

Being Ready for an Emergency

Posted by on 19 Jul 2012 | Tagged as: Indoors

One of the best things you can do to get through an emergency situation is to be properly prepared for it. Disasters can strike any place at any time, so being ready well ahead of that time gives you a vital edge.There is a lot which potentially goes into being prepared for a disaster.

While covering every last thing would be quite the lengthy undertaking, here are some of the essential basics.To begin with, every person in your home should have a seventy two hour kit. Having these kits should be the absolute minimum of preparation which is undertaken.These kits are going to have a few days’ worth of food and water in them, as well as spare clothing, emergency blankets, flashlights, and other important items. These are used as a baseline for ensuring that people will be taken care of for a few days.

Of course, more expansive food storage is always recommended. By having a couple of weeks’ worth of food and water put away in a secure and accessible place, you will be able to deal with all but the most severe of disasters.The basic premise of these preparations is that while there will be help coming if there is an emergency, it is best to not fully rely on that help. As has been seen countless times in the past, even limited preparations go a long way toward ensuring that everyone has a safer experience overall.

A good plan is also going to be incredibly helpful in an emergency situation. Families should take the time to come up with a plan of action which addresses what everyone is to do if a disaster strikes. Should you have to deal with storm damage, you’ll want to know what to do.Delegating responsibility and giving everyone something to do is a good way to improve on awareness and to be ready. For example, families can go over where the food and water is, how to prepare meals, taking a head count, turning off the gas and water lines, and possibly evacuating.

By going over this information ahead of time, it should make it so that everyone will be able to respond to a threat in a much more effective way. When a disaster hits, the time you have to respond evaporates, and much of what happens will rely on the direction of others and instinct.By drilling ahead of time and knowing what to do, families will be able to respond to the situation in the best and safest way possible. As a part of the contingency plan, everyone should know where the nearest emergency shelter is.

In most communities, schools, churches, and community centers all function as emergency shelters. They are able to take more punishment because they are bigger and stronger buildings, and the fact that most of them will be centered within a community makes them a good meeting spot.By having supplies and being informed and ready about the area and where to go and what to do, you gain an advantage over the situation. When it all comes down to it, being ready is all about ensuring that the ones that you love and care about are taken care of and that they are going to be as safe as

Benefits Of LED Grow Lights

Posted by on 18 Jul 2012 | Tagged as: Indoors

Whether you have a hydroponic, aeroponic or regular soil indoor garden, LED grow lights can provide your indoor lighting needs to allow your plants to be grown indoors and thrive. Hydroponic gardens are gardens which are grown without soil, using a medium other than soil. Vermiculite or sand are often used for the rooting and growth of the plants. Hydroponic gardening requires special fertilizers to replace the nutrients that the plant would be getting from the soil as well as grow lights to allow the plant to photosynthesize. Aeroponic gardening is a similar process, in which plants are grown without soil. The roots grow in an environment enhanced with oxygen. These plants also need to be grown with a grow light to simulate sunlight. There are traditional grow lights that work very well. The drawback with traditional grow lights can include the cost, as they do not last as long as LED grow lights.

Some estimates of the life of led growlights are up to one hundred thousand hours. To put this into perspective, if the lights were used twenty four hours per day, they would last for over four thousand days, or about eleven years. LED grow lights use less energy per hour than traditional growlights as well. The average energy usage of the traditional grow light is between one hundred and one thousand watts. LED grow lights, on the contrary, use about ten watts to operate. The energy savings is substantial in LED growlights. When using LED grow lights, according to NASA research, the best ratio for color is to use 80 percent red LED and roughly 20 percent blue LED lights for optimum growth. After switching from traditional lights to LED lights, if the temperature of the room falls below about seventy degrees, it may be necessary to use a heating mat to keep your plants warmed. In order to determine proper placement of your LED grow lights, first it is important to determine the intensity of light that your plants needs to thrive. It is important to keep the plants in an environment which closely simulates the growing conditions that the plant needs outdoors to thrive. If your plants need more intense light, place the grow lights closer to them.

The recommended distance between the canopy of the plants and the lights ranges from five to thirty six inches. Once your plants are well established, you will notice that they do not transpire as much, and their water needs will be less than if they had been grown in soil or with traditional grow lights. Transpiration is the process in which plants lose water through their leaves and stems. Of course, if there is no heat from the light source, as will be the case using LED lights, since LED lights do not produce heat, the evaporation from the soil or other growing medium, in the case of hydroponics, will be less. This makes plants grown with LED lights prone to overwatering until the indoor gardener adjusts to using the LEDs. If you are looking to save energy and money in your indoor gardening, clearly LED grow lights are a viable option for the home indoor gardener. They are safer due to their lack of heat produced. LED lights produce less waste since they do not need to be replaced as frequently as traditional lights. They provide the spectrum of indoor lights that your plants need and have been scientifically engineered from years of research, much of it happening in space, as NASA looked for the best lighting options to produce food in outer space. The benefits of LED lights have come from the highest technology into our homes, and are worth considering for your indoor garden lighting sources.

Learning How To Get Rid Of Bed Bugs

Posted by on 09 Jul 2012 | Tagged as: Advice, Indoors

As children we often heard, “Good night, Sleep tight, Don’t let the bed bugs bite.” We have probably said it as adults; however with the current state of bed bug epidemic in the United States, indeed reports of bed bugs have increased over five hundredfold in the United States alone. There are several theories of how bed bugs have experienced resurgence. Most of them involve the increased mobility of the citizens of the US and international travels.

In this suggestion, bed bugs become the souvenir that you did not want, hitchhiking a ride in your luggage and creating a bed bug problem in your home. When discovering that you have a bed bug problem, getting rid of bed bugs becomes the ten thousand dollar question. Discovering how to get rid of bed bugs is a long and arduous process. There are many companies that advertise that they can get rid of bed bugs in a simple application or two. This is simply not realistic, as a bed bug infestation requires a concentrated effort, and usually the use of several bed bug products designed to get rid of bed bugs once and for all.

The first step in your process of how to get rid of bed bugs involves identifying that you have bed bugs. This can be by visually seeing the bugs themselves, or by observing signs of their presence. Bed bugs are nocturnal and very secretive, and do not come out of their hiding, except to feed, and they do not need to feed every day. Observing bites can be a first hint, although the bites are not always identified as bed bugs bites. Finding blood spots on the sheets or small black fecal droppings, resembling black grains of salt can also show a bed bug infestation. In your next step of how to get rid of bed bugs at home, you will need to contain the bed bugs.

Often, people throw away their mattress, box springs, bedding, furniture, etc. This is not really necessary, and encasements can be purchased that are designed to keep the bed bugs in the mattress, box springs, pillow, etc. These encasements are also designed to trap bed bugs into the bed or furniture, causing them to starve to death. These bed bug products have special zippers that have small teeth and no gaps for bugs to get in or get out. After removing the sheets, seal them in a bag and take them to the washing machine.

Wash and dry the bedding on the hottest setting possible for the fabric and dry for at least twenty minutes. Throw away all the bags that you use to transport your bedding or clothes in case there are stowaways. Remove all clutter from the room, as the more hiding places that are available for the bed bugs to hide inside, the harder it will be to get rid of bed bugs. After you have covered the mattresses and furniture, there are several products available to kill bed bugs.

You can use powders, sprays, steamers, and heaters to take the next step in how to get rid of bed bugs. Bed bug products have come a long way from using DDT, a harmful pesticide widely used. DDT was very effective, but deemed as not being safe, and now traps, steamers, safe sprays and powders are the bed bug products of choice. The average home bed bug infestation takes several weeks to get through and requires proven bed bug products and determination and diligence on the part of the homeowner in order to get rid of bed bugs at home.

Have Ants In Your House? Control Measures

Posted by on 04 Jun 2012 | Tagged as: Advice, Indoors

Ants ?r? th? most common ?nd annoying insects found ?n homes. Th??? insects invade ??ur home, pilfer ??ur food, ?nd set-u? shelters inside ??ur house. “how to get rid of ants” ??u ask? In order t? rid ??ur house ?f th??? critters, ?t ?? important t? understand th??r behavior ?? ??u ??n implement appropriate control measures.

Behavior

Ants live ?n colonies underground wh?r? th?? eat, sleep, ?nd mate. Th?? have rooms f?r food storage, nurseries ?nd mating. In th? colony resides th? egg-laying female known ?? th? queen ant. Sh? ?? accompanied b? ??m? short-lived males ?nd sterile females known ?? th? workers. Th??? ?r? th? ants ??u w?ll find trailing along th?t drop ?f juice ?n th? counter ?nd crawling ?ut ?f th? cereal box ?n th? pantry.

Ev?r? wonder wh? ?t ???m? like th?? always know wh?r? th? food ??? It’? b???u?? th?? do! Ants leave ? chemical message ?n th? food th?? find leaving ? trail ?n th??r way b??k t? th? nest, allowing ?th?r ants t? track ?nd find th? same food.

Ants ?l?? have ? large variety ?f foods th?t appeal t? th?m: greasy materials, starches, wood, ?nd ?ll types ?f plant ?nd animal materials. Ants have ? particular affinity t? th? same kinds ?f foods w? like, making th?m ? ??rt??ul?rl? annoying pest ?n ?ur homes.

Control

Th? control measures taken against ants w?ll depend primarily ?n th? type ?f ants ??u ?r? dealing w?th, ??th?r (1) ants w?th nests inside ??ur home ?r (2) ants outside ?f ??ur home th?t come into ??ur home.

(1) F?r ants nested w?th?n ??ur home, th? most effective way t? eliminate th?m ?? t? attack th? nest directly. Finding ? nest, h?w?v?r, ??n b? tricky. Often time nests m?? b? w?th?n walls ?r roof rafters. Th? best places t? look ?r? locations wh?r? wood has b??n wet ?nd weathered. Rotting timbers ?t th? foundation, porches, window sills, leaky plumbing, ?nd rafters under ? leaky roof spot ?r? ?ll good places t? start. Y?u m?? ?l?? b? ?bl? t? follow ants t? th??r colony. Once th? colony has b??n located, ?n insecticide spray ?r dust w?ll u?u?ll? eradicate th? colony. Y?u m?? need t? inject insecticide inside th? nest walls t? ensure th? queen ant has b??n killed.

(2) T? keep ants outside ?f ??ur home fr?m coming ?n, preventative measures ?h?uld b? taken t? keeps ants ?ut ?f ??ur house. Two simple steps ??n eliminate many entrance-ways f?r ants. First, seal cracks ?nd crevices into ??ur home. Second, u?? detergent t? scrub off ?n? trails ants m?? have left ?n entryways ?nd th?n spray insecticide t? prevent ants fr?m r?-entering.

Summary

Ridding ??ur house ?f ants ??n b? ?n arduous task. If ??u know wh?r? th??’r? coming fr?m ?nd how th?? behave, ?t ?? ? lot easier t? keep th??? pesky bugs ?ut ?f ??ur house. Get th? ants ?ut ?f YOUR house, ?nd take control ?f ??ur ant situation today.

Mukluks: Learn How To Clean Them

Posted by on 30 May 2012 | Tagged as: Advice, Indoors

Anyone who’s got a set of mukluk slippers understands that they truly are comfy. If you want to keep your feet from freezing while you’re sitting around your fireplace reading your favorite novel, they can’t be topped. But even lounging around doing nothing can result in your slippers becoming dirty. And when that happens, do you know how to clean them?

The first thing you need to do is take off one of your mukluks (because they’re so comfortable that I know you’re wearing them now!) and read what’s on its label. It’s going to give you a good picture about how your slip-ons need to be laundered. Typically, the tag’ll tell you to stick with cold water. The reason behind this is that hot water will most likely make them smaller. Anyone that’s washed their favorite shirt in the wrong temperatured water knows exactly how depressing that is! An additional thing to check out’s just what cycle it’s best to put your mukluks on on (if machine washing is going to be an acceptable way to clean them, that is). In case you’ve got it up way too high, the slippers might get ruined from being tossed around within your washing machine. So it is best to place them on a light spin cycle. Additionally, the washing liquid you use should be moderate. Clothing tends to be destroyed from harsh substances in stronger washing detergents.

Dry cleaning’s generally the best way to clean up most kinds of slippers. But you might elect to hand wash them too. A damp rag and a bit of liquid detergent’ll be the only items you will need. Do not use a powder laundry detergent since it won’t work well with the suede-style fabric found in mukluk slippers. Powder’s better for slippers with more leathery fabrics like moccasins for men. Whenever you’re set, just wash your socks and do not press too much. That is should you not wish for the socks to come loose.

Right after you’re finished, it’s advisable to air dry them. Be mindful of what area you opt to do this at. Make sure it’s not cold or humid. As a result it’s best that you stay away from your garage. A better idea might be to hang them up someplace like the bathroom. Yet another word of advice is placing some baking soda on your slippers. This way they’ll not stink when dry. It even helps in quickening the drying process.

Now, knowing the correct way to clean mukluks ought to be simple. You have to go by the recommendations of the tag. Go with everything that it says over this article in the event they contradict each other. The company produced it, so they know what is going to be most effective. For even more advice, head to Mukluk Slippers.

Advantages of Hiring an Electrician

Posted by on 03 Apr 2012 | Tagged as: Advice, Indoors

Electrical power has come to be depended on by many households. Many people prefer and use electrical appliances for their everyday needs. Everything from refrigerators to washing machines needs to run at peak performance to decrease energy consumption levels. This is very important in today’s ecologically motivated society. Some people need advice when their appliances begin to wear out. They need to know if the appliance is worth fixing, or if they should upgrade to a newer model. Expert electricians in denver can give people the advice that they are searching for. People who live in this area are particularly vulnerable to changing weather conditions.

A reputable electrician will give their consumers an estimate on the costs of any electrical work. They will also be willing to give reliable guarantees and references. It is advisable for a consumer to check out these references for authenticity. It is not safe for unqualified people to work on electrical problems. This could lead to dangerous and unsafe conditions. It is a wise idea for a potential electrical contractor consumer to check out the professional training level of the expert being considered for a job. A customer should ensure that the electrician has experience working with the particular problem that is occurring.

Word of mouth is an excellent way to find qualified electricians in denver. Most professionals that are reliable will also refer work they are not suited for to more experienced experts. It makes sense to test the electrician on their knowledge base. They should be able to answer all of the consumers questions and have answers to alleviate any concerns. Electrical heating and air conditioning units can run up a hefty bill fast. It is always a great idea to comparison shop to know what the going rates for electricians in the area are. Be advised that sometimes cheaper is not always better. A consumer will still need to ascertain whether the professional is qualified for the job.

Electricians do a wide variety of work. They should be called in for any type of house or business inspections. Purchasing a building with faulty wiring can lead to costly repairs. Until those repairs are made, the building is considered a safety hazard. It is always best to call in the best for electrical questions. Another important time to call an electrician is when any extensive remodeling is being undertaken. This could change the needs of the wiring system and electrical box.

Many people rely on electricians to fix their electrical appliances. These professional can advise a consumer whether their appliance is up to the current electrical safety codes. This could be a determining factor when deciding whether to upgrade older appliances for newer models. Electricians can also give invaluable advice on how to conserve energy costs. Some of their advice may be relatively simple measures such as using timers or utilizing larger appliances like washers during off peak hours. There are many reasons why consumers should consider consulting with expert electricians.

The Rules of Coffee Beans Storage

Posted by on 01 Apr 2012 | Tagged as: Advice, Indoors

Coffee beans are very sensitive, and if you want the best coffee, you have to know how to store coffee beans. There are 4 rules for storing coffee beans. First, the coffee beans cannot be exposed to air. As the beans are aromatic in nature, and the aroma plays a large part in giving the coffee its flavor. When they are stored in an open air conditioning, the coffee beans will lose their aroma relatively quick. Secondly, don’t store the beans in an area where it is humid. Just like other dry food, the humidity can cause the beans to spoil quickly. Thirdly, keep the beans in a cool place. Just like moisture, temperate plays a part in causing the beans to spoil easily. The fourth rule is to block out any light. As coffee beans are seeds, light can cause some changes in the beans. This affects the oils in the beans and thus affect the flavor of the beans.

With so many rules, what is the best way to store coffee beans? In my opinion, you can store the beans into a canister. Airtight and vacuum canisters are good choices because they keep the coffee beans in a limited air condition. You can try opaque canisters such as the ceramic or stainless steel ones as they add the extra protection from light. You should also place the canister in you kitchen cabinet because it is cool, dark and dry. This is the best storage condition for the coffee beans.

Another thing you need to know is the storage period of the coffee beans. Freshly roasted beans should be kept for 7 to 10 days because they retain the best flavor during this period of time. Any time period longer than that and you can taste the difference in your coffee. Therefore, the best method to produce the best coffee is to buy small volumes of coffee beans and finish them up in less than 7 days.

There is another solution if you have a large quantity of coffee beans. Freeze them if you need to store them for a longer time. You need to be extra careful when packing the coffee beans. This method which I found from Chef Supremo is extremely effective in keeping the flavor of the beans. First, retain the beans in the original valve bag. Then, pack valve bag into another ziplock and suck out the air with a straw before sealing the bag. Next, wrap the ziplock with opaque shopping bags to block the light from reaching the beans.

How to Choose the Correct Extractor Fan for your Indoor Garden

Posted by on 26 Mar 2012 | Tagged as: Advice, Indoors

Many gardeners are now growing plants indoors rather than outside as this gives them greater control over the environment the plant grows in and means they can be grown throughout the year, even during cold seasons.

One such method of growing plants indoors involves the use of a hydroponic solution rather than soil to feed the plant important nutrients and minerals it needs for growth. Growing plants within a hydroponic solution is called hydroponics and it has a number of added benefits to growing plants in soil. Firstly the plant is not afflicted with the soil borne diseases and pests that affect garden plants. Secondly growing plants in a hydroponic solution enables you to precisely control what nutrients the plant receives and when.

However there are a number of challenges to overcome if you wish to grow plants indoors. Whenever you move the plant indoors, such as in a house you have to artificially create the conditions the plant would normally require in its natural environment. This includes a correct supply of nutrients, light, heat, carbon dioxide and humidity. If anyone of these factors is incorrect the health of the plant is jeopardized and the plant can die.

When growing indoors it makes sense to keep the plants contained within a grow room or grow tent. This confined environment enables you to more easily control the environment. Adequate lighting is required and this often involves the use of a high intensity halide lights that are powerful enough to facilitate photosynthesis. Another important factor is humidity and carbon dioxide levels. The best way of controlling the humidity within a grow room is to use a hydroponic extractor fan to remove stale air from inside the grow room and draw fresh air into the grow room. Carbon dioxide is essential to plants so that they can photosynthesize and a replenishment of the air ensures that carbon dioxide levels remain as they would outside. Humidity levels that are too high can cause disease and rot. A hydroponic fan makes it possible to remove excess humidity from a grow room so that ideal conditions can be met.

Fan designs vary and some are more powerful than others. Often the power of the fan is measured in CFM or cubic feet per minute and is the volume of air that can be extracted every minute.

To ensure you have the correct fan for your grow area simply divide the volume of the grow area by 3 to obtain the correct CFM. Than buy a hydroponic fan with a corresponding CFM.

Installation Steps for Your Sump Pump

Posted by on 26 Mar 2012 | Tagged as: Advice, Indoors

Has your basement ever flooded because of the high water table that is present in your area? Perhaps you built your own home and neglected to consider a sump pump installation. Maybe your home is quite a bit older and sump pumps were not invented yet. Whatever the case, this modern convenience might be the difference between your home flooding or staying fresh and dry all year long.

If you need to install one of these devices, here are some general steps to follow to accomplish this do-it-yourself task.

  • Pick a room in your basement that is the least used. Perhaps your utility room where the furnace and water heater are located.
  • Cut out a section of concrete in the floor. Dig out the area below the concrete wide enough to hold a large corrosion resistant barrel. Plumb in a drain pipe connected to your home’s main sewer system. Install electrical service to the new sump pit.
  • Place the barrel in the hole with seep holes drilled in the upper portion of the barrel. Run the drain pipe into the barrel. Line the outside of the barrel with small wire mesh. Place gravel around the outside of the barrel.
  • Perform the sump pump installation in the barrel and hook up the drain and electrical service to the new pump.
  • Test the system and make sure it works correctly.
  • Create a platform above the new sump pit barrel and complete the project by pouring premixed cement around the top of the pit and smoothing it flush with your existing floor.

This project should only be done by experienced and confident do-it-yourselfers. Remember to follow all local building codes and have your work checked by a licensed contractor and your local building inspector when it is completed. If you are not confident in performing this project, contact your local plumbing professional for a complete estimate and installation.

« Previous PageNext Page »